Hanging gates with their own hands: drawings, hanging gates
Gates hinged type representquality, reliable construction, characterized by low cost and the possibility of use for conventional residential buildings, garages and industrial facilities. They can be done on their own, previously armed with the necessary materials and carefully studied the relevant information. If you follow all the rules, you can create a system that will work impeccably in all weather conditions. And adding an automatic mechanism will turn the operation of the gate into real pleasure.
There are gates hanging from several basic elements, such as:
- guide parts;
- support rollers;
To make an overhead gate, the drawing mustbe drawn up before the start of the work, while the dimensions of all parts must be taken into account and the appropriate location should be selected, which will prevent difficulties in the passage of vehicles and the passage of people. Also, calculations are performed to determine the total cost of the structure.
Gates hanging will last much longer whenuse of high quality parts. This can be determined by the presence of all the requisites of the manufacturer and strong packaging. Products of little-known firms may have a low cost, but it should not be taken into consideration if there is a damaged low-quality package, and there are no accompanying documents for the goods. Because of such accessories, the gate can jam or simply not open at the most inopportune moment.
Hanging gates with their own hands: drawings and the process of erection
The first stage of the work is the foundation casting,which is subsequently installed bearing supports with the help of fasteners or special supports. The foundation pit should have a sufficient depth exceeding the freezing level of the soil. Concrete mass after completion of the foundation foundation freezes within 2-3 weeks.
To move the outboard drive are placedspecial guides. Also worth noting the existence of drawings in which there is no lower guide element, while there are additional differences in the form of a system of support rollers and the location.
The next step is to acquireaccessories suitable for the chosen type of system are grippers, blinds, guiding structures and rollers. The latter basically have a special coating, protecting against adverse weather conditions. They are made of plastic and metal, the level of strength of plastic elements is similar to steel, and they produce much less noise when using the gate.
Creating a frame
The frame is made by welding steelpipes. This process requires extreme accuracy to prevent distortions, while it is necessary to systematically use the plumb bob to check the smoothness of the elements. The leaflets are then fixed to the resulting frame with rivets or screws. The material can be a lattice, plastic or metal sheets, wood, the choice depends on the strength and preferences of the owners. Hanging gates, made by themselves,can be decorated with the material used on thewalls, so they will not attract attention in a closed position and become almost invisible. In addition, the decoration is popular with artificial stone. Of particular importance is the tightness of the plugs located on the sides of the guiding structure, since when moving the flaps they can be knocked out.
As prevention techniquesunauthorized access to the territory is most often used to install a barbed wire in the upper part of the structure, while it should not hinder the rapid movement of the leaflets, and the introduction of an electric shock system. Any drawing of the gate must provide for a free enough space to move the doors, this will ensure correct operation and a long period of operation of the entire system. On average, the distance should be twice as large as the entrance opening.
The construction of automation requirespower supply, while the input power cable must have a high-quality protection against negative influences. Gates hanging open in this case after pressing a special button located in the territory, or a set of code from the side of the street. It is also possible to create a remote control that resembles an electronic key for cars. Do not forget about the lighting of the remote control system and the space next to the gate.
The design of this type is lightmoving and no need for additional free space on both sides of the gate, as only the sides of the flaps are used, which have a parallel arrangement with respect to the fence. Systems with a top suspension have acquired a wide prevalence due to the possibility of opening the valves using an electric drive. This innovation significantly simplifies life by the fact that you do not need to push the pendant yourself, as in this case you just need to press the button, which is especially important after a hard working day.
Previously, the lack of building materials andaccompanying elements significantly complicated the task of independent production of gates with an overhead suspension. But today the search for necessary details does not cause any special difficulties, and due to the high competition of manufacturers, the materials have become available to any category of the population. The design of hanging gates for self-manufacturing will cost much less compared to the total amount that will be exhibited by the construction company after completion of the work. Accurate use will ensure a long and trouble-free operation of the gate for a period of at least 15 years. Support rollers work softly and quietly even in the absence of special care and the use of lubricants.